This page was written, edited, reviewed & approved by Ruben Davidoff following our comprehensive editorial guidelines Ruben Davidoff, the Founding Partner, has 30+ years of legal experience as a New York personal injury attorney.
Table of Contents
If you were hurt while brazing on a Queens job site, you may qualify for workers’ comp and a separate injury claim. A Queens brazing accident lawyer at Davidoff Law can review how the torch, fumes, or fire caused your injury and which New York laws apply. Burns, eye damage, and fume injuries can keep you off the job for months while the bills keep arriving.
Our team can preserve the equipment, request the permit and fire guard records, and explain how brazing accident litigation in Queens works alongside your comp benefits. We handle these cases on a contingency fee basis.
Call 718-268-8800 for a free case evaluation.
How Davidoff Law Can Help After a Brazing Accident in Queens
Brazing claims often depend on records and equipment that can disappear within days. Davidoff Law has represented injured New Yorkers since 2012, and we handle construction accident cases in Queens from our Queens office. After a brazing injury, our team can:
- Request the FDNY hot work permit and the torch operator’s certificate records
- Preserve the torch, hoses, regulators, and gas cylinders before anyone repairs or discards them
- Obtain the safety data sheets for the filler metal and flux used that day
- Coordinate your workers’ comp benefits with any third-party claim
Our phones are answered 24/7, and we offer Spanish-language service.
What Causes Brazing Accidents on Queens Job Sites?
Brazing joins metal parts by melting a filler metal with a torch, without melting the parts themselves. HVAC, plumbing, and refrigeration crews often braze copper lines in basements and ceiling spaces, where open flame, pressurized gas, and toxic fumes meet.
Torch, Cylinder, and Hose Failures
Oxy-fuel brazing relies on oxygen and a fuel gas such as acetylene or propane. A leaking hose, faulty regulator, or unsecured cylinder can cause a flash fire or explosion. Heating a tank or pipe that once held flammable material can do the same.
Toxic Fumes From Fillers and Fluxes
Some brazing filler metals contain cadmium, and many fluxes contain fluorides. Overheating these materials in a tight space without proper exhaust can release fumes that damage the lungs.
Missing Fire Guards and Permit Lapses
Sparks and heat can ignite insulation, dust, or debris on the other side of a wall. A brazing fire can spread when no one is assigned to watch for fire during and after the work.
Common Brazing Injuries We Handle
We represent Queens workers and their families after brazing injuries such as:
- Thermal and flash burns to the hands, arms, and face
- Eye injuries from heat, sparks, or flying metal
- Lung damage from cadmium, flux, or other metal fumes
- Smoke inhalation in basements and other enclosed spaces
- Falls from ladders or scaffolds while brazing overhead lines
- Blast injuries from cylinder or line explosions
- Fatal injuries
Our team also handles burn injury claims that arise outside construction work.
What New York Laws Apply to Brazing Accident Litigation in Queens?
New York protects construction workers beyond workers’ comp. The right law depends on who controlled the work and which safety rule was broken.
Labor Law § 241(6) and the Industrial Code Rules for Torch Work
Labor Law § 241(6) requires owners, contractors, and their agents to provide reasonable and adequate protection in construction, excavation, and demolition areas. The duty covers workers and anyone lawfully on the site. Courts generally require these claims to rest on a specific rule in the New York Industrial Code.
Whether a rule applies depends on the facts of each job. Two rules often matter in brazing cases:
- Rule 23-1.25: Covers the cylinders, hoses, and torches used in welding and flame cutting, plus eye protection and fire extinguishers near combustibles
- Rule 12-2.8: Names brazing directly and sets ventilation and respirator requirements, with the strictest rules for cadmium, lead, and fluorine-bearing fluxes in confined spaces
Labor Law § 200 and Who Controlled the Work
Labor Law § 200 requires work sites to be arranged and operated to protect the health and safety of the people there. A claim under this law often turns on who controlled the brazing work or knew about the hazard.
Labor Law § 240(1) When Brazing Happens at Height
Brazers often work on ladders, lifts, or scaffolds to reach overhead pipes and ductwork. Labor Law § 240(1) requires owners and contractors to provide ladders, scaffolds, and similar devices that give proper protection.
The law may apply if a worker falls because that equipment failed or was never provided. Owners of one- and two-family homes who do not direct or control the work are excluded.
OSHA and FDNY Hot Work Rules as Evidence
Federal OSHA standards for welding, cutting, and brazing include a construction fire prevention rule that calls for a fire watch when normal precautions are not enough. Another rule, 29 CFR 1926.353, requires ventilation or air-line respirators when workers heat cadmium-bearing materials in enclosed spaces. These federal rules can help show what safe practice is required.
The FDNY requires a Hot Work Operations Permit for torch work using oxygen and a flammable gas. It also issues the G-60 certificate for torch operators and the F-60 certificate for construction-site fire guards, and missing records can become important evidence.
Workers’ Compensation vs. a Third-Party Brazing Injury Claim
Most injured brazers start with workers’ comp, which pays medical care and part of lost wages regardless of fault. A third-party claim can add damages that comp does not cover.
Why You Generally Cannot File a Claim Against Your Employer
Under Workers’ Compensation Law § 11, comp benefits are generally your exclusive remedy against your employer. The main exception applies when an employer fails to carry the required coverage. If your comp claim is disputed, our Queens workers’ compensation lawyer can help you pursue those benefits.
Who Else May Be Liable
In brazing cases, liable third parties may include:
- The property owner or general contractor
- Another subcontractor whose crew created the hazard
- The manufacturer of a defective torch, regulator, or hose
- A gas supplier that delivered a damaged cylinder
Workers’ Compensation Law § 29 lets you collect comp benefits and pursue a third-party claim. The comp carrier holds a lien on a third-party recovery for the benefits it paid, after litigation expenses are deducted. Settling for less than the comp benefits owed generally requires the carrier’s written consent or a court order.
What Is My Queens Brazing Accident Case Worth?
Case value depends on the injury, the treatment you need, your wages, and available insurance. Workers’ comp and a third-party claim cover different losses.
Workers’ comp may cover:
- Medical treatment related to the injury
- A portion of lost wages
- Benefits for a permanent impairment
A third-party claim may also cover:
- Past and future lost earnings
- Future medical costs
- Pain and suffering
Can I Recover Damages If I’m Partly Blamed for a Brazing Accident in New York?
Yes. For construction injuries outside motor vehicle cases, CPLR 1411 provides that your share of fault reduces your damages proportionally rather than barring recovery. We review training, equipment, and site conditions when a defendant blames you.
Steps to Protect Your Brazing Accident Claim
When you are able, take the following steps after a brazing injury:
- Get medical treatment and tell providers how the injury happened
- Report the injury to your employer in writing as soon as possible
- Photograph the work area, torch setup, cylinders, and any ventilation
- Write down the gas, filler metal, and flux used, if you know them
- Collect names of co-workers, the fire guard, and the foreman
- Keep copies of medical records, pay stubs, and comp paperwork
- Avoid recorded statements to insurers before you speak with a lawyer
How Long Do I Have to File a Brazing Accident Lawsuit in Queens?
CPLR 214 generally gives you 3 years to file a personal injury lawsuit. If a city agency or other public entity is responsible, General Municipal Law § 50-e requires a notice of claim within 90 days. Families pursuing a wrongful death claim generally have 2 years from the death under EPTL 5-4.1.
Larger civil cases in Queens are heard in Queens County Supreme Court, which has courthouses in Jamaica and Long Island City.
Frequently Asked Questions About Brazing Accident Litigation in Queens
Usually not. Workers’ comp is generally the exclusive remedy against your employer, unless the employer failed to carry coverage. You may still have a claim against an owner, contractor, or equipment maker.
Welding melts the metal parts being joined, while brazing melts only a filler metal. Brazing often involves fluxes and cadmium-bearing fillers, so toxic fumes are often central to brazing claims.
Usually only when height is involved. If you fell from a ladder, lift, or scaffold that did not give proper protection while brazing, § 240(1) may apply. Burns and fume injuries usually fall under other laws.
Yes. New York lets you receive comp benefits while pursuing a third-party claim. The comp carrier may hold a lien on part of any third-party recovery.
You may still have a claim. Tenants, visitors, and passersby are not covered by workers’ comp, so they may pursue a negligence claim against the responsible party. Labor Law § 241(6) also protects people lawfully on a construction site.
Most injury lawsuits must be filed within 3 years, but claims against a public entity need a notice of claim within 90 days.
Contact Our Queens Brazing Accident Lawyer at Davidoff Law
A brazing injury can take away your income and your ability to work with your hands. A Queens brazing accident lawyer at Davidoff Law can explain your options and identify potentially liable parties.
Call 718-268-8800 to schedule a free case evaluation with Ruben Davidoff and our team.

Ruben Davidoff, founder of Davidoff Law, established his practice in 2012 after moving to Queens in 1988 and beginning his legal career in 1997. Admitted in NY State and the US District Court for the Eastern District of NY, he has extensive experience in personal injury, handling various cases like airline crashes, auto accidents, and slip/trip and fall cases. Mr. Davidoff provides personalized attention, recovering millions for clients through settlements or verdicts, leveraging decades of experience.

